MultiMaterial Class

Initializes a new instance of the MultiMaterial class

Enables advanced blending mode. In this mode, it is possible to configure blending for each channel separately.

Whether to enable the advanced shader scripting functionality.

Whether to write the Ambient Occlusion.

Whether to write the Base Color.

Whether to write the Emissive.

Whether to write the normals, height data.

Whether to write the Metallic.

Whether to write the Reflectance.

Whether to write the Roughness.

Defines how much of the light is accessible to a surface point.

Amount of anisotropy.

Local surface direction. Used by anisotropic materials only.

The direction basis. Used by anisotropic materials only.

The user data of the component.

Diffuse albedo for non-metallic surfaces, and specular color for metallic surfaces.

Gets the base type of the object.

Defines how/if the rendered object is blended with the content of the render target.

Strength of the clear coat layer.

A detail normal used to perturb the clear coat layer using bump mapping (normal mapping).

Perceived smoothness or roughness of the clear coat layer.

Whether the object supports cloning.

Gets the collection of the child components.

Whether the object is created using a base type.

The parameter is intended to transfer custom data to shader scripts.

The parameter is intended to transfer custom data to shader scripts.

The depth offset value. Limitation: You can specify the value by means additional block in shader graph, but can't set value in this property.

The depth offset mode gives the ability to change output depth in the fragment shader. Works only for deferred shading.

The height offset that is specified by the texture.

The scale for Displacement.

Whether to show the object in the editor.

Whether the object is disposed.

Gets or sets the configuration data of the object's settings in the editor.

Whether the object is read only in the editor.

Whether the object is read-only in the editor with respect to parent objects.

The color and intensity of light emitted from the surface.

Whether the component is enabled. Any functionality of component is not works when it disabled.

Determines whether the object is attached to a hierarchy of the components and enabled. The object will be enabled only when all parents are enabled, and the property Enabled is enabled.

Determines when the object is attached to a hierarchy of the components, is enabled and the object if not part of a resource (it is usual object instance). The object will be enabled only when all parents are enabled, and the property Enabled is enabled.

The injection to the fragment shader code.

Additional functions to the fragment shader code.

Gets the object hierarchy control controller.

The parameter to determine behavior of material index selection during rasterization.

The list of materials.

Whether a surface appears to be dielectric (0.0) or conductor (1.0). Often used as a binary value (0 or 1).

The name of the component.

Whether to work in network server mode. It is false until the scene is not loaded.

Whether to enable synchronization of the component between server and clients.

The material normals. This property is intented to be used with normal mapping.

The opacity of the surface.

Whether to enable dithering for smooth blending of Masked material.

Transparency threshold for Masked mode.

Gets the parent object.

Gets the parent root object.

Vertices position offset. Performed in vertex shader.

Amount of ray-tracing reflection. Used as option to use screen space or raytracing reflection technique.

Whether it is possible to apply decals on the surface.

Whether the surface receive shadows from other sources.

Fresnel reflectance at normal incidence for dielectric surfaces. This directly controls the strength of the reflections.

Whether the object is placed in the detach queue from the parent.

The result provided by the object.

Mode update of the object.

Perceived smoothness (1.0) or roughness (0.0) of a surface. Smooth surfaces exhibit sharp reflections.

Whether the object supports saving to a file.

The displaying mode of an on-screen label of the component in the scene editor.

The reflection mode of the incoming light.

Specular tint to create two-tone specular fabrics.

Whether to update the resulting object data.

Whether to enable a soft particles mode. In this mode, objects increase transparency in those places behind which there is an obstacle nearby. The mode works only for transparent materials.

A minimal distance to an obstacle to activate the soft particles mode.

Tint for the diffuse color after scattering and absorption through the material.

A power parameter for subsurface scattering rendering.

A thickness factor of the surface for subsurface scattering rendering.

Whether the material use double-sided rendering.

Whether the double-sided material must flip normals for back faces rendering.

Object settings when used as a type.

Whether to use vertex color for Base Color and Opacity calculation.

The injection to the vertex shader code.

Additional functions to the vertex shader code.

Adds a component as a child.

Creates a copy of the object.

Creates a child component.

Creates a child component.

Creates a child component.

Detaches the object from the hierarchy and deletes the object data.

Determines whether the specified object is equal to the current object.

Allows an object to try to free resources and perform other cleanup operations before it is reclaimed by garbage collection.

Finds the parent of the specified type.

Finds the parent of the specified type.

Finds the parent of the specified type.

Finds the parent or self of the specified type.

Finds the parent or self of the specified type.

Finds the parent or self of the specified type.

Gets all parents of the component.

Finds a child component by name.

Finds a child component of the specified type.

Finds a child component of the specified type.

Finds a child component of the specified type.

Finds a child component by name and number in the case when there are several components with the specified name.

Finds a child component by path.

Finds child components.

Finds child components.

Finds child components of the specified type.

Finds child components of the specified type.

Finds child components of the specified type.

Serves as the default hash function.

Returns the path to the object from the parent.

Returns the object's access path from the root object.

Returns a type when the object is used as a type.

Gets the Type of the current instance.

Checks if a method is running over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Creates a shallow copy of the current Object.

Returns the object metadata member by name.

Returns the object metadata members.

Calls a method by name.

Cancels the execution of selected method that run over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Cancels the execution of all methods that run over time. You can start executing such methods using MethodInvoke(String, Object, Double, Double) method.

Called during object creation in the editor. Designed to configure the initial state.

Called when a component is added to the parent.

Called when the object is cloned.

Called when a child component is added.

Called when a child component is removed.

Called when the object is detached from a hierarchy of the components or is disabled. See also EnabledInHierarchy property.

Called when the object is detached from a hierarchy of the components or is disabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Called when the object is attached to a hierarchy of the components and is enabled. See also EnabledInHierarchy property.

Called when value of Enabled property is changed.

Called when the object is attached to a hierarchy of the components and is enabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Called during object loading.

Called when the object metadata member is received by name.

Called upon receipt of the object's metadata members.

Called when preloading the resources used by the object.

Called when a component is removed from the parent.

Called during object saving.

Called during the simulation step.

Called during the simulation step.

Called during the update process of all objects.

Performs recompilation of the result.

Preload resources used by the object.

Gets the value of a property by name.

Sets the value of a property by name.

Removes all child components.

Removes a child component.

Detaches the object from its parent.

Clears the result.

Returns the name and type of the object as a string.

Checks whether the object provided as a type is public.

Checks whether the member is set up as public.

Occurs when a component is added to the parent.

Occurs when the AdvancedBlending property value changes.

Occurs when the AdvancedScripting property value changes.

Occurs when the AffectAmbientOcclusion property value changes.

Occurs when the AffectBaseColor property value changes.

Occurs when the AffectEmissive property value changes.

Occurs when the AffectGeometry property value changes.

Occurs when the AffectMetallic property value changes.

Occurs when the AffectReflectance property value changes.

Occurs when the AffectRoughness property value changes.

Occurs when the AmbientOcclusion property value changes.

Occurs when the Anisotropy property value changes.

Occurs when the AnisotropyDirectionBasis property value changes.

Occurs when the AnisotropyDirection property value changes.

Occurs when the BaseColor property value changes.

Occurs when the BlendMode property value changes.

Occurs when the ClearCoat property value changes.

Occurs when the ClearCoatNormal property value changes.

Occurs when the ClearCoatRoughness property value changes.

Occurs when object is cloned.

Occurs after changing value of CloneSupport property.

Occurs when a child component is added.

Occurs when a child component is removed.

Occurs when the set of children is changed.

Occurs when the CustomParameter1 property value changes.

Occurs when the CustomParameter2 property value changes.

Occurs when the DepthOffset property value changes.

Occurs when the DepthOffsetMode property value changes.

Occurs when the object is disabled from a hierarchy of the components or is disabled. See also EnabledInHierarchy property.

Occurs when the object is detached from a hierarchy of the components or is disabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Occurs when the Displacement property value changes.

Occurs when the DisplacementScale property value changes.

Occurs when value of DisplayInEditor property is changed.

Occurs when the object is disposed.

Occurs when the Emissive property value changes.

Occurs when the Enabled property value changes.

Occurs when the object is attached to a hierarchy of the components and is enabled. See also EnabledInHierarchy property.

Occurs when the EnabledInHierarchy property value changes.

Occurs when the object is attached to a hierarchy of the components and is enabled. The method is called only in simulation application. See also EnabledInHierarchy property.

Occurs when the FragmentCode property value changes.

Occurs when the FragmentFunctions property value changes.

Occurs during object loading.

Occurs when the MaterialIndex property value changes.

Occurs when the object metadata member is received by name.

Occurs upon receipt of the object's metadata members.

Occurs when filtering receive members of the object metadata.

Occurs when the Metallic property value changes.

Occurs when component name is changed.

Occurs when the NetworkMode property value changes.

Occurs when the Normal property value changes.

Occurs when the Opacity property value changes.

Occurs when the OpacityDithering property value changes.

Occurs when the OpacityMaskThreshold property value changes.

Occurs when the PositionOffset property value changes.

Occurs when preloading the resources used by the object.

Occurs when the RayTracingReflection property value changes.

Occurs when the ReceiveDecals property value changes.

Occurs when the ReceiveShadows property value changes.

Occurs when the Reflectance property value changes.

Occurs when a component is removed from the parent.

Occurs after changing the result value.

Occurs before compiling the result.

Occurs after the completion of the compilation of the result.

Occurs when the Roughness property value changes.

Occurs during object saving.

Occurs after changing value of SaveSupport property.

Occurs when the ScreenLabel property value changes.

Occurs when the ShadingModel property value changes.

Occurs when the SheenColor property value changes.

Occurs during the simulation step.

Occurs during the simulation step.

Occurs when the SoftParticles property value changes.

Occurs when the SoftParticlesDistance property value changes.

Occurs when the SubsurfaceColor property value changes.

Occurs when the SubsurfacePower property value changes.

Occurs when the Thickness property value changes.

Occurs when the TwoSided property value changes.

Occurs when the TwoSidedFlipNormals property value changes.

Occurs during the update process of all objects.

Occurs when the UseVertexColor property value changes.

Occurs when the VertexCode property value changes.

Occurs when the VertexFunctions property value changes.

Calls the object method by name.

Gets the value of the object property by name.

Gets the value of the object property by name.

Sets the value of the object property by name.